Food & Drink Tins

We have manufactured a large range of tins to hold a wide variety of foods and drinks within the market place. From mints and sweets, to biscuits and cakes. From teas and coffees, to wines and liqueurs.

Shaker Spice Tin Shaker Spice Tin We produced this shaker spice tin in plain silver. It has an inner metal plug with pierced holes for product to be sprinkled. 38 mm diameter x 88 mm Shaker Spice Tin 38 mm diameter x 88 mm We produced this shaker spice tin in plain silver. It has an inner metal plug with pierced holes for product to be sprinkled.	Heart Shaped Tin Heart Shaped Tin We produced this small heart shaped tin to hold a range of fills. We produced a range of confectionery, from mints to sour sweets of all different shapes to go inside the tins. We also filled these tins with a range of lip glosses. 50 mm x 50 mm x 15 mm Heart Shaped Tin 50 mm x 50 mm x 15 mm We produced this small heart shaped tin to hold a range of fills. We produced a range of confectionery, from mints to sour sweets of all different shapes to go inside the tins. We also filled these tins with a range of lip glosses.	Star Shaped tin Star Shaped tin We tooled this small tin for several uses. We produced a range of different shaped mints and other confectionery sweets as fill. And we also filled these tins with a variety of different flavours of lip gloss. With internal print, these were a very attractive product. 55 mm x 55 mm x 18 mm Star Shaped tin 55 mm x 55 mm x 18 mm We tooled this small tin for several uses. We produced a range of different shaped mints and other confectionery sweets as fill. And we also filled these tins with a variety of different flavours of lip gloss. With internal print, these were a very attractive product.
Hello Kitty Oval Tin Hello Kitty Oval Tin We produced this fun small oval tin for a range of licensed Hello Kitty products. We filled the tins with 15ml lip gloss for a cosmetics line and the tin was also used to hold 14gm confectionery product. 58 mm x 38 mm x 15 mm Hello Kitty Oval Tin 58 mm x 38 mm x 15 mm We produced this fun small oval tin for a range of licensed Hello Kitty products. We filled the tins with 15ml lip gloss for a cosmetics line and the tin was also used to hold 14gm confectionery product.	Small Hinged Lid Tin Small Hinged Lid Tin Tins are usually available from stock (moq 50 tins) and can be personalised by printing or embossing Inserts can be made to order to hold product if required. 60 mm x 48 mm x 14 mm Small Hinged Lid Tin 60 mm x 48 mm x 14 mm Tins are usually available from stock (moq 50 tins) and can be personalised by printing or embossing Inserts can be made to order to hold product if required.	Bow Shaped Tin Bow Shaped Tin We produced this bow shaped tin as a lisenced product. We made little plastic figurines to attach by a ball chain to the tin and filled the tins with shaped confectionery. The product was thin blister packed and complete packed units delivered to client. We are able to handle the whole process from concept to delivery. 63 mm x 38 mm x 23 mm Bow Shaped Tin 63 mm x 38 mm x 23 mm We produced this bow shaped tin as a lisenced product. We made little plastic figurines to attach by a ball chain to the tin and filled the tins with shaped confectionery. The product was thin blister packed and complete packed units delivered to client. We are able to handle the whole process from concept to delivery.
Coffee tins Coffee tins 100gm and 250gm Our client required 2 tins to hold a 100gm and a 250gm pack of coffee. Both these tins complemented each other in size and structure and we developed a very subtle print effective with a matt and gloss varnish. The internal was gold lacquered to a food safe standard. 100gm = 63mm x 42mm x 118mm deep. 250gm = 88mm x 58mm x 155mm deep. 63 mm x 42 mm x 118 mm Coffee tins 63 mm x 42 mm x 118 mm 100gm and 250gm Our client required 2 tins to hold a 100gm and a 250gm pack of coffee. Both these tins complemented each other in size and structure and we developed a very subtle print effective with a matt and gloss varnish. The internal was gold lacquered to a food safe standard. 100gm = 63mm x 42mm x 118mm deep. 250gm = 88mm x 58mm x 155mm deep.	Toblerone Tin Toblerone Tin We were asked to develop a promotional tin to take the triangular bars of toblerone. This was a difficult cross section to form and one lid had to be very tight while the other had to be loose for access. With a fair amount of embossing detail the end result was impressive. 66 mm x 62 mm x 308 mm Toblerone Tin 66 mm x 62 mm x 308 mm We were asked to develop a promotional tin to take the triangular bars of toblerone. This was a difficult cross section to form and one lid had to be very tight while the other had to be loose for access. With a fair amount of embossing detail the end result was impressive.	Square Hinged Lid Tins Square Hinged Lid Tins Tins are usually available from stock (moq 50 tins) and can be personalised by printing or embossing Inserts can be made to order to hold product if required. 75 mm-102mm square x 92 mm-143mm deep Square Hinged Lid Tins 75 mm-102mm square x 92 mm-143mm deep Tins are usually available from stock (moq 50 tins) and can be personalised by printing or embossing Inserts can be made to order to hold product if required.
Round Tins Round Tins Tins are made to order and can be personalised by printing or embossing (MOQ 1k). Inserts can be made to order to hold product if required. 76 mm - 152mm diameter x variable depths Round Tins 76 mm - 152mm diameter x variable depths Tins are made to order and can be personalised by printing or embossing (MOQ 1k). Inserts can be made to order to hold product if required.	Slip lid tea tin Slip lid tea tin We produced this 100g tea tin which has a beautiful soft radius slip lid. Giving a very elegant feel to the tin. MOQ = 3,000 units. 78 mm diameter x 94 mm Slip lid tea tin 78 mm diameter x 94 mm We produced this 100g tea tin which has a beautiful soft radius slip lid. Giving a very elegant feel to the tin. MOQ = 3,000 units.	Square Stacking Tea tin Square Stacking Tea tin We produced this tin with a deep step in the lid and a base that fits this recess perfectly, so the tins can be individual or stacked and fixed together. This offers the client a flexible combination for retail. 80 mm x 80 mm x 98 mm Square Stacking Tea tin 80 mm x 80 mm x 98 mm We produced this tin with a deep step in the lid and a base that fits this recess perfectly, so the tins can be individual or stacked and fixed together. This offers the client a flexible combination for retail.
Small Round Window Cake Tin Small Round Window Cake Tin 80 mm diameter x 83 mm Small Round Window Cake Tin 80 mm diameter x 83 mm	2 Tier Tea Tin 2 Tier Tea Tin Our client wanted some bright, fun, original packaging created for their tea and cookie gift pack. The product retailed very successfully. 83 mm diameter x 170 mm 2 Tier Tea Tin 83 mm diameter x 170 mm Our client wanted some bright, fun, original packaging created for their tea and cookie gift pack. The product retailed very successfully.	4 Tier Tins 4 Tier Tins Various sizes and shapes of the tin can be transformed into tiered tins with mulitple levels of varying heights that can be used for all sorts of different purposes. The minimum order quantity is usually 3,000 tins and can be personalised by printing or embossing. 83 mm diameter x 195 mm 4 Tier Tins 83 mm diameter x 195 mm Various sizes and shapes of the tin can be transformed into tiered tins with mulitple levels of varying heights that can be used for all sorts of different purposes. The minimum order quantity is usually 3,000 tins and can be personalised by printing or embossing.
100gm & 250gm Coffee Tins 100gm & 250gm Coffee Tins Our client required 2 tins to hold a 100gm and a 250gm pack of coffee. Both these tins complemented each other in size and structure and we developed a very subtle print effective with a matt and gloss varnish. The internal was gold lacquered to a food safe standard. 100gm = 63mm x 42mm x 118mm deep. 250gm = 88mm x 58mm x 155mm deep. 88 mm x 58 mm x 155 mm 100gm & 250gm Coffee Tins 88 mm x 58 mm x 155 mm Our client required 2 tins to hold a 100gm and a 250gm pack of coffee. Both these tins complemented each other in size and structure and we developed a very subtle print effective with a matt and gloss varnish. The internal was gold lacquered to a food safe standard. 100gm = 63mm x 42mm x 118mm deep. 250gm = 88mm x 58mm x 155mm deep.	Medium Hinged Lid Tin Medium Hinged Lid Tin Tins are usually available from stock (moq 50 tins) and can be personalised by printing or embossing Inserts can be made to order to hold product if required 95 mm x 60 mm x 21 mm Medium Hinged Lid Tin 95 mm x 60 mm x 21 mm Tins are usually available from stock (moq 50 tins) and can be personalised by printing or embossing Inserts can be made to order to hold product if required	Rectangular Metal Clip Lid Tin Rectangular Metal Clip Lid Tin We can produce this metal clip lid tin to any height required. We fit an inner plastic seal to retain the freshness of the content to be packed inside. The MOQ for this item is 3,000 units. 100 mm x 57 mm x 113 mm Rectangular Metal Clip Lid Tin 100 mm x 57 mm x 113 mm We can produce this metal clip lid tin to any height required. We fit an inner plastic seal to retain the freshness of the content to be packed inside. The MOQ for this item is 3,000 units.
Square Metal Clip Lid Tin Square Metal Clip Lid Tin We can produce this beautiful metal clip lid tin to any height. The tin has an inner rubber seal to ensure the contect stays fresher for longer. MOQ 3,000 units. 103 mm x 103 mm x 150 mm Square Metal Clip Lid Tin 103 mm x 103 mm x 150 mm We can produce this beautiful metal clip lid tin to any height. The tin has an inner rubber seal to ensure the contect stays fresher for longer. MOQ 3,000 units.	Square Cut-Corner Tea Caddy Square Cut-Corner Tea Caddy Our client wanted to alter their existing packaging from a general design to something unique in tin, for their tea and cake range. We suggested that a square tin based on scale drawings of Chatsworth House would make a superb cake tin, we then realised that the famous ‘cascade’ would fit well on the cut corner tea tin. The end result… 2 beautifully printed unusual shaped tins that complemented the range very well. Square Cut-Corner Tea Caddy - 103mm x 103mm x 110mm deep. Square Cake Tin - 115mm x 115mm x 80mm deep. 103 mm x 103 mm x 110 mm Square Cut-Corner Tea Caddy 103 mm x 103 mm x 110 mm Our client wanted to alter their existing packaging from a general design to something unique in tin, for their tea and cake range. We suggested that a square tin based on scale drawings of Chatsworth House would make a superb cake tin, we then realised that the famous ‘cascade’ would fit well on the cut corner tea tin. The end result… 2 beautifully printed unusual shaped tins that complemented the range very well. Square Cut-Corner Tea Caddy - 103mm x 103mm x 110mm deep. Square Cake Tin - 115mm x 115mm x 80mm deep.	Round Tins Round Tins Tins are available from stock (moq 50 tins) and can be personalised by printing or embossing Inserts can be made to order to hold product if required. 107 mm diameter x 172 & 337mm deep Round Tins 107 mm diameter x 172 & 337mm deep Tins are available from stock (moq 50 tins) and can be personalised by printing or embossing Inserts can be made to order to hold product if required.
Glastonbury Tor Cake Tin Glastonbury Tor Cake Tin We produced this round cake tin printed up with the Glastonbury Tor. 115 mm diameter x 70 mm Glastonbury Tor Cake Tin 115 mm diameter x 70 mm We produced this round cake tin printed up with the Glastonbury Tor.	Chatsworth House Cake Tin Chatsworth House Cake Tin Gift Set Our client wanted to alter their existing packaging from a general design to something unique in tin, for their tea and cake range. We suggested that a square tin based on scale drawings of Chatsworth House would make a superb cake tin, we then realised that the famous ‘cascade’ would fit well on the cut corner tea tin. The end result… 2 beautifully printed unusual shaped tins that complemented the range very well. 115 mm x 115 mm x 80 mm Chatsworth House Cake Tin 115 mm x 115 mm x 80 mm Gift Set Our client wanted to alter their existing packaging from a general design to something unique in tin, for their tea and cake range. We suggested that a square tin based on scale drawings of Chatsworth House would make a superb cake tin, we then realised that the famous ‘cascade’ would fit well on the cut corner tea tin. The end result… 2 beautifully printed unusual shaped tins that complemented the range very well.	Hello Kitty Shaped Tin Hello Kitty Shaped Tin We produced this fun tin in the shape of Hello Kitty. This was created as the outer packaging for both cosmeticss and confectionery items. 128 mm x 108 mm x 37 mm Hello Kitty Shaped Tin 128 mm x 108 mm x 37 mm We produced this fun tin in the shape of Hello Kitty. This was created as the outer packaging for both cosmeticss and confectionery items.
Smokehead Whisky Tin Smokehead Whisky Tin We produced this tin with a Piano Hinge to give an unusual external opening, with 2 clips to fasten shut. The bottle and presentation card were packed securely inside with foam to protect the bottle. 130 mm diameter x 310 mm Smokehead Whisky Tin 130 mm diameter x 310 mm We produced this tin with a Piano Hinge to give an unusual external opening, with 2 clips to fasten shut. The bottle and presentation card were packed securely inside with foam to protect the bottle.	Round Window Cake Tin Round Window Cake Tin 136 mm diameter x 92 mm Round Window Cake Tin 136 mm diameter x 92 mm	Square Cake Tin Square Cake Tin This square cake tin has been printed both internally and externally for a premium feel and look. It has been used to hold cakes and cookies as a retail line. 167 mm x 164 mm x 70 mm Square Cake Tin 167 mm x 164 mm x 70 mm This square cake tin has been printed both internally and externally for a premium feel and look. It has been used to hold cakes and cookies as a retail line.
Square Cake Tin Square Cake Tin This slip lid tin has soft radius corners to the lid (moq 50 tins). 167 mm x 167 mm x 65 mm Square Cake Tin 167 mm x 167 mm x 65 mm This slip lid tin has soft radius corners to the lid (moq 50 tins).	Tetley Oval Tin Tetley Oval Tin We produced this tin in plain silver with a bold embossed logo on the lid and body section. A bead was added around the top of the body to give the section some extra strength. 172 mm x 75 mm x 160 mm Tetley Oval Tin 172 mm x 75 mm x 160 mm We produced this tin in plain silver with a bold embossed logo on the lid and body section. A bead was added around the top of the body to give the section some extra strength.	Round Window Cake Tin Round Window Cake Tin 176 mm diameter x 78 mm Round Window Cake Tin 176 mm diameter x 78 mm
Selecta Tin Selecta Tin Our client required a tin the shape of their vending machines. We manufactured this shape and style of tin which gave the client exactly the proportions they required, with a bright 4 process colour litho prinited image. 178 mm x 103 mm x 103 mm Selecta Tin 178 mm x 103 mm x 103 mm Our client required a tin the shape of their vending machines. We manufactured this shape and style of tin which gave the client exactly the proportions they required, with a bright 4 process colour litho prinited image.	6 Compartment Tea Tin 6 Compartment Tea Tin We were asked to produce a tin with a flush fitting lid, that offered compartments to take 6 different flavours of tea. This very smart, stylish looking tin, was perfect for the market. 256 mm x 126 mm x 85 mm 6 Compartment Tea Tin 256 mm x 126 mm x 85 mm We were asked to produce a tin with a flush fitting lid, that offered compartments to take 6 different flavours of tea. This very smart, stylish looking tin, was perfect for the market.	Andresen Tin Andresen Tin Our client briefed us to create a brand new tin to hold 3 half bottles of port for the travel, retail and gift markets.We created this new complex tin with an inward curl lid and base for a smart, smooth exterior.The tin lid was sculpted for a unique appearance with subtle print and embossing to enhance the corporate logo.We developed a flock coated tray insert to securely hold the 3 half bottles of port. 258 mm x 118 mm x 88 mm Andresen Tin 258 mm x 118 mm x 88 mm Our client briefed us to create a brand new tin to hold 3 half bottles of port for the travel, retail and gift markets.We created this new complex tin with an inward curl lid and base for a smart, smooth exterior.The tin lid was sculpted for a unique appearance with subtle print and embossing to enhance the corporate logo.We developed a flock coated tray insert to securely hold the 3 half bottles of port.
Jacobs Creek Wine Tin Jacobs Creek Wine Tin We were asked to produce a tin strong enough to hold 4 small bottles of wine. We produced tray inserts to hold the bottles securely in place, which worked extremely well. The tins were a big success as a Christmas retail line. 285 mm x 90 mm x 225 mm Jacobs Creek Wine Tin 285 mm x 90 mm x 225 mm We were asked to produce a tin strong enough to hold 4 small bottles of wine. We produced tray inserts to hold the bottles securely in place, which worked extremely well. The tins were a big success as a Christmas retail line.	12" Round Tray 12" Round Tray Small Round Tray The minimum order quantity is usually 3,000 units and can be personalised by printing or embossing. 300 mm diameter x 33 mm 12" Round Tray 300 mm diameter x 33 mm Small Round Tray The minimum order quantity is usually 3,000 units and can be personalised by printing or embossing.	Rocket Fuel vodka tins Rocket Fuel vodka tins Our client asked us to come up with a metal packaging solution to hold 6 bottles of Vodka safely. With the weight of the 6 fragile glass bottles, packaging was a challenge. We used an exceptionally thick tinplate to withstand the overall 8kg weight per tin and then produced 2 thick secure foam inlays the first to sit in the base of the tin to hold the bottles securely in place, the second to fit over the lids of the bottles to prevent any movement. 310 mm x 198 mm x 250 mm Rocket Fuel vodka tins 310 mm x 198 mm x 250 mm Our client asked us to come up with a metal packaging solution to hold 6 bottles of Vodka safely. With the weight of the 6 fragile glass bottles, packaging was a challenge. We used an exceptionally thick tinplate to withstand the overall 8kg weight per tin and then produced 2 thick secure foam inlays the first to sit in the base of the tin to hold the bottles securely in place, the second to fit over the lids of the bottles to prevent any movement.
12.5" Round Tray 12.5" Round Tray Small Shallow Round Tray The minimum order quantity is usually 3,000 units and can be personalised by printing or embossing. 330 mm diameter x 20 mm 12.5" Round Tray 330 mm diameter x 20 mm Small Shallow Round Tray The minimum order quantity is usually 3,000 units and can be personalised by printing or embossing.	Clip Lid Tins Clip Lid Tins We offer tins with a plastic lid and rubber internal seal, with a metal clip.These can be made round or square in a variety of sizes and are ideal for storage of coffee, tea or confectionery. 108 mm diameter x 180 mm Clip Lid Tins 108 mm diameter x 180 mm We offer tins with a plastic lid and rubber internal seal, with a metal clip.These can be made round or square in a variety of sizes and are ideal for storage of coffee, tea or confectionery.